I have successfully cross compiled the linux kernel 3.14 which downloaded from:
https://github.com/parallella/parallella-linux
I am using Ubuntu 15.10 X64 and arm-linux-gnueabihf-gcc-4.9
However, it won't display anything on the hdmi when I copy the newly compiled uImage into the /BOOT of micro sd card to replace the original uImage kernel (ubuntu-14.04-hdmi-z7010-20140611.img) .
The hdmi display work again once I revert it back to the original uImage kernel.
On the other hand, I have attached my kernel configuration file:
- config3.txt
- Linux Kernel 3.14 Configuration File
- (142.21 KiB) Downloaded 2242 times
Log:
LINK vmlinux
LD vmlinux.o
MODPOST vmlinux.o
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
LD init/built-in.o
KSYM .tmp_kallsyms1.o
KSYM .tmp_kallsyms2.o
LD vmlinux
SORTEX vmlinux
SYSMAP System.map
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
GZIP arch/arm/boot/compressed/piggy.gzip
AS arch/arm/boot/compressed/piggy.gzip.o
CC arch/arm/boot/compressed/misc.o
CC arch/arm/boot/compressed/decompress.o
AS arch/arm/boot/compressed/debug.o
CC arch/arm/boot/compressed/string.o
SHIPPED arch/arm/boot/compressed/hyp-stub.S
AS arch/arm/boot/compressed/hyp-stub.o
SHIPPED arch/arm/boot/compressed/lib1funcs.S
AS arch/arm/boot/compressed/lib1funcs.o
SHIPPED arch/arm/boot/compressed/ashldi3.S
AS arch/arm/boot/compressed/ashldi3.o
SHIPPED arch/arm/boot/compressed/bswapsdi2.S
AS arch/arm/boot/compressed/bswapsdi2.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
UIMAGE arch/arm/boot/uImage
Image Name: Linux-3.14.12-parallella-xilinx
Created: Sun Mar 27 20:42:46 2016
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 16560688 Bytes = 16172.55 kB = 15.79 MB
Load Address: 00008000
Entry Point: 00008000
Image arch/arm/boot/uImage is ready
May I know where did I made a mistake?
Thanks