I am having problems getting my board to boot.
Had an issue with the size of the SD card: .
I've since tried with Shodruk's Linaro Nano image and 9600's Debian 7.0 image. The images were installed with no errors reported. They were sync'ed before removal. I can mount the partitions and view files.
Board is connected to a bench supply delivering 5.000 Volts. The supply can deliver 5 Amps at 5 Volts. I tested, today, the output of the bench supply using a quality volt metre.
Board connections: cat5 to the RJ45 connector and the 5 Volt supply. No other connection at this time, including USB or HDMI.
The board green LED comes on and stays on, no other LED's light. The RJ45 connector lights never come on.
After a minute or so, I connect the HDMI and there is no output.
The board consumes a steady 0.170 to 0.180 Amps.
Any ideas?