linux-ameetlaptop1:~ # minicom --baudrate=115200 -8 --device=/dev/ttyUSB0 


Welcome to minicom 2.6.1

OPTIONS: I18n 
Port /dev/ttyUSB0

Press CTRL-A Z for help on special keys



U-Boot 2012.10-00003-g792c31c (Jan 03 2014 - 12:24:08)

I2C:   ready
DRAM:  992 MiB
WARNING: Caches not enabled
MMC:   SDHCI: 0
SF: Detected N25Q128 with page size 64 KiB, total 16 MiB
In:    serial
Out:   serial
Err:   serial
Net:   zynq_gem
Hit any key to stop autoboot:  0 
Configuring PL and Booting Linux...
Device: SDHCI                                                                   
Manufacturer ID: 3                                                              
OEM: 5344                                                                       
Name: SS16G                                                                     
Tran Speed: 50000000                                                            
Rd Block Len: 512                                                               
SD version 2.0                                                                  
High Capacity: Yes                                                              
Capacity: 14.8 GiB                                                              
Bus Width: 4-bit                                                                
reading parallella.bit.bin                                                      
                                                                                
2083744 bytes read                                                              
reading uImage                                                                  
                                                                                
4468792 bytes read                                                              
reading devicetree.dtb                                                          
                                                                                
8607 bytes read                                                                 
## Booting kernel from Legacy Image at 03000000 ...                             
   Image Name:   Linux-3.12.0-g0bc9c3a-dirty                                    
   Image Type:   ARM Linux Kernel Image (uncompressed)                          
   Data Size:    4468728 Bytes = 4.3 MiB                                        
   Load Address: 00008000                                                       
   Entry Point:  00008000                                                       
   Verifying Checksum ... OK                                                    
## Flattened Device Tree blob at 02a00000                                       
   Booting using the fdt blob at 0x02a00000                                     
   Loading Kernel Image ... OK                                                  
OK                                                                              
   Loading Device Tree to 1fffa000, end 1ffff19e ... OK                         
                                                                                
Starting kernel ...                                                             
                                                                                
Uncompressing Linux... done, booting the kernel.