According to the web page, the "Parallella-16 Micro Server" uses a Xilinx Zynq Z7010, so if you have that board, you need the 7010-image. The kernel, devicetree and bitstream files are included in the (beta) image, so if image and board match, it should boot out of the box. You can check the BOOT partition manually, if the required files are not there, you need to provide them yourself.
For the older images, the username and passwort both are "linaro". For the newer beta images, both username and password are "parallella".
After boot, the boards try to get their IP addresses via DHCP. I do not know of any fallback solutions if there is no DHCP server available.Statistics: Posted by sebraa — Mon Feb 16, 2015 10:27 pm
]]>