I'm still curios if 25mm^2 may be enough to have 4 core + routers and multiplexers inside 1 chip and I wasn't able to get an idea on the height that is possible to reach, i hope in something like 0.1 / 0.5 mm if so is possible than all chips will be hold and cooled by a grid/cage of copper that will act as a farady cage around chips too ... like this it should be possible to make them now without "too much" engineer challenges in my mind.
If the heat it stills a problem it's possible to down-clock the core and make them working 1/2 frequency or alternately or even less ... no ?
Now a day the sodimm connector can reach around 200 connector in ~7 cm so 4 *200 are 800 cores and may be designed in copper or in optic fiber in the future (may be possible but I'm aiming to this )
so a block of 7 * 1.5 * 1.5 cm may contain enough resources for a portable device for example.
Sorry if I got too close to the moon I'm just pushing my thought as close as possible to the reality but I have not enough cognition of cause so if you find something useful in my words make it yours.
Looking for more connection between real world and my mind .
Thanks in advance for your replies
AStatistics: Posted by adexmont — Thu Oct 26, 2017 4:26 pm
]]>