Issues during burning the SD card

[wide_key]

I made some mistakes when durning the card:

1. The output device of the 'dd' command is /dev/sdc, not /dev/sdc1. Actually, after overwritting /dev/sdc, there would be two partitions (/dev/sdc1 and /dev/sdc2
2. The Linux kernel and the ZYNQ bit file should be placed in the partition of /dev/sdc1, a small windows FAT partition with its label "BOOT", not the partition of /dev/sdc2, which is the root ext4 partition of Ubuntu. There is a /boot direction in the ext4 partition, which is very confusing for me.

I guess the Quick Start guide can be more clear on these issues...