ADC to parallella
Posted: Mon Aug 31, 2015 8:16 am
Hello,
I want to connect an ACD to the parallella,
the requirements from the ADC are as following:
1. 12 bit.
2. same connectivity protocol as the parallella (LVDS).
3. fit to the 48 pins of GPIO.
4. support up to 1.2GBPS.
which ADC can you recommend on?
also, i tried to search for one in Digi-key site, but couldn't confirm is has 48 pins.
http://www.digikey.co.il/product-search ... LS&lang=en
i would like to get your recommendation.
thank you,
Oryan.
I want to connect an ACD to the parallella,
the requirements from the ADC are as following:
1. 12 bit.
2. same connectivity protocol as the parallella (LVDS).
3. fit to the 48 pins of GPIO.
4. support up to 1.2GBPS.
which ADC can you recommend on?
also, i tried to search for one in Digi-key site, but couldn't confirm is has 48 pins.
http://www.digikey.co.il/product-search ... LS&lang=en
i would like to get your recommendation.
thank you,
Oryan.