Page 1 of 1
Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 11:16 am
by leon_heller
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 5:41 pm
by Janos
Looks fine to me. What does not work?
p.s. you might want to post long text like this in code tags.
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 6:03 pm
by leon_heller
Thanks.
I've used code tags.
USB has stopped working, and there is an intermittent supply fault causing the board to reboot when it is touched or moved.
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 6:12 pm
by Janos
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 6:21 pm
by leon_heller
It's something internal on the board.
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 8:10 pm
by 9600
Definitely the right size barrel connector on the PSU? I experienced similar issues when I used one where the inside diameter was ever so slightly too large.
Andrew
Re: Is this boot sequence OK?
Posted:
Sun Mar 16, 2014 8:32 pm
by leon_heller
Yes, 5.5 mm/2.1 mm. I've tried two supplies in case the cable or the connector was faulty. They work OK with other boards, such as the BBB.