I have tried to create an image using the http://www.parallella.org/create-sdcard/
Every time I try ( which I am on my 4th or 5th time, inclucding re-downloading incace I had a corrupt image ) I get a kernel panic mccblk0p2 not found can not mount root ext...., here is a screen shot
http://picpaste.com/pics/20140701_13460 ... 240549.jpg
The board I have is "1x Parallella-16 Desktop Computer - Parallella-16 with GPIO and Zynq Z7010"
For FBGA Flavor I chose "Zynq 7010 version with HDMI display"
For parrallela kernel I chose "Linux kernel with HDMI support"
Here is the directory listing of my BOOT partition of the hard drive
# ls -lah BOOT/
total 6.3M
drwx------ 2 tholum tholum 512 Dec 31 1969 .
drwxr-x---+ 3 root root 4.0K Jul 1 13:56 ..
-rw-r--r-- 1 tholum tholum 8.5K Jun 5 10:27 devicetree.dtb
-rw-r--r-- 1 tholum tholum 2.0M Jul 1 13:40 parallella.bit.bin
-rw-r--r-- 1 tholum tholum 4.3M Feb 6 14:34 uImage
Also the sd cards fdisk -l output
# fdisk -l /dev/sdc
Disk /dev/sdc: 16.0 GB, 16039018496 bytes
64 heads, 32 sectors/track, 15296 cylinders, total 31326208 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a07b6
Device Boot Start End Blocks Id System
/dev/sdc1 2048 264191 131072 b W95 FAT32
/dev/sdc2 264192 14600191 7168000 83 Linux
I also tried the ubuntu-lxde-14.03.06-p16g1.img and I get nothing from the hdmi output and it never shows up on the network
Any help would be greatly appriciated, I have a 16gb micro sd card ( That came with my beaglebone )