Page 1 of 1

Cannot boot from SD-Card with headless configuration

PostPosted: Tue Aug 05, 2014 9:23 am
by yildizabdullah
My board SKU number is A101020.

I use SanDisk Ultra microSDHC 8GB as SD card. System boot log is attached below.

Re: Cannot boot from SD-Card with headless configuration

PostPosted: Tue Aug 05, 2014 10:48 am
by yildizabdullah
Actually, I've found that a similar problem and its solution had been discussed before at

http://forums.parallella.org/viewtopic.php?f=48&t=1353.

You can find ajtravis's solution at http://forums.parallella.org/viewtopic.php?f=48&t=1353&hilit=plymouth&start=30#p9591.

Re: Cannot boot from SD-Card with headless configuration

PostPosted: Tue Aug 05, 2014 12:34 pm
by yildizabdullah
I've only changed the property bootargs as

Code: Select all
- bootargs = "console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4 rootwait devtmpfs.mount=0";

+ bootargs = "console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4 rootwait";


What is the point of removing devtmpfs.mount=0 to log in?