Dear Parallella users,
I would appreciate your assistance please in getting my new parallella board up and running.
I have been following this github parallella ubuntu guide https://github.com/parallella/parallella-ubuntu
I am however stuck at step #9. "First boot (with screen/keyboard/mouse or serial port attached)"
I don't have access to a serial port cable. I do have a monitor and use micro-hdmi to hdmi cable and a hdmi to DVI adapter.
I'm assuming although not specified in the instructions on this webpage, I need to download the kernel with HDMI support.
For instructions on this I have referred to http://www.parallella.org/create-sdcard/ and carried out step#5. Having completed this step and unmounted my SD card from my host PC, I've put the micro-SD card in the Parallella board.
When I connect the power to my Parallella board (with the micrcoSD card in place, network cable, keyboard micro-hdmio cable connected etc.) nothing happens. The green LED for the power is and network is on, There is no green LED for the HDMI.
I'm not sure what I'm doing wrong (obviously missing some step).
Your help would be sincerely appreciated.
Thank you in advance,
Regards,
Will.