Page 1 of 1

Check if my parallella is still working?

PostPosted: Sun Jun 16, 2019 4:25 am
by eloy785
I bought a parallella time ago, i already connected all necessary cables any any LED light is on, how can I check if it is working.

Here is a picture of my installation.

Re: Check if my parallella is still working?

PostPosted: Tue Jun 18, 2019 8:59 pm
by Min
If you have HDMI connected to a monitor, you can connect with a USB keyboard. then it's a single board computer.

or you can use SSH, Serial Terminal

Re: Check if my parallella is still working?

PostPosted: Tue Jul 16, 2019 9:43 am
by ajtravis
eloy785 wrote:I bought a parallella time ago, i already connected all necessary cables any any LED light is on, how can I check if it is working.

Here is a picture of my installation.


Hi,

Connect a TTL-USB serial cable to the UART using the three pins next to the Ethernet connector:

https://www.amazon.co.uk/USB-TTL-Serial ... +ttl+cable

See this post for more details of how to use it:

viewtopic.php?f=50&t=1711&p=10679&hilit=uart+ttl#p10679

HTH,

Tony.