Vivido project for parallella

[jimmystone]

Hi, All
I find there is only one vivado project for parallella in


However, most design of this project is make with IPs, and cannot be changed by its verilog code.
And I notice the source code of elink is move to

Is there any vivado project works with these oh source code？
Or I need build one on my own？

Thanks.

[peteasa]

oh is the one! If you follow the build instructions then it will create a vivado project and an fpga with the latest elink.. good luck!

Peter

[jimmystone]

[peteasa]

I have found that xilinx modify the tcl interface quite a lot between versions. Worth a go to try the upgrade to 2016.2 but dont expect things to go smoothly. Easiest is to download 2015.2 plus the update. They will install ok so that you can use both at the same time, then build the oh fpga and stick with 2015.2. If you want to upgrade I am guessing that the easiest is to load the created project into 2016.2 and do the update that way. By update of the project you avoid the tcl issues. I would only update if you want a specific feature of 2016.2.

Peter.

[peteasa]

@jimmystone: looks like the stable branch https://github.com/parallella/oh/tree/stable is the best bet. I created a working project from that just now.

Peter.

[jimmystone]