Just gotten around to playing with my Kickstater 16-core Parallella gen1 board. The Linux side works just fine, however the board locks up when attempting any of the Epiphany tests; unresponsive to network/keyboard/mouse input and requires a hard-reset.
This is using the standard Ubuntu 14.04 release, with the HDMI kernel and FPGA binary.
Board: Kickstarter 16-core, ZYNQ 7020
PSU: 5v 2A (part no. 993-1247-ND from Digikey)
Cooling: 30x30x6.9 fan (part no. 259-1572-ND from Digikey)
Temperature: ~60degC according to xtemp
Kernel: kernel-hdmi-default.tgz (MD5 = 8eab4b6228e32a0432279f76de51300f)
Bitstream: parallella_e16_hdmi_gpiose_7020.bit.bin (MD5 = d920ca30ce6c1a9b1da841fa18e5dda3)
I suspect I'm seeing the same problem that was reported here: viewtopic.php?f=50&t=1401&p=8780
Any suggestions?