Power Supply

Any technical questions about the Epiphany chip and Parallella HW Platform.

Moderator: aolofsson

Re: Power Supply

Postby gceline » Fri Jul 11, 2014 7:33 pm

This looks like it meets the specs, but our experience has shown that the cheaper the product the less likely it is to perform to spec - you may be better off using a supply from a reliable vendor.
http://www.digikey.com/product-detail/e ... ND/2235250
Posts: 119
Joined: Wed Jul 31, 2013 12:06 pm
Location: Lexington, MA

Re: Power Supply

Postby Janos » Sat Jul 12, 2014 10:08 am

I would like the option of buying a board without a power supply.
Janos of The Scottish BOINC Team
Posts: 51
Joined: Sun Feb 24, 2013 8:31 am

Re: Power Supply

Postby jubertroldan » Sun Nov 30, 2014 11:08 am


I have the default 5VDC and 3A 15Watts power adaptor that came in with the board, can I use it to supply two (2) parallella boards? connecting them in parallel?

kind regards,
Posts: 10
Joined: Thu May 29, 2014 8:37 am

Re: Power Supply

Postby 9600 » Sun Nov 30, 2014 6:07 pm

That would probably work fine when both boards are idle else running light workloads, but I wouldn't recommend it, since one of the most common causes of problems is insufficiently rated power supplies.


Andrew Back (a.k.a. 9600 / carrierdetect)
User avatar
Posts: 997
Joined: Mon Dec 17, 2012 3:25 am


Return to Epiphany and Parallella Q & A

Who is online

Users browsing this forum: No registered users and 7 guests