Cannot boot from SD-Card with headless configuration

Hardware related problems and workarounds

Cannot boot from SD-Card with headless configuration

Postby yildizabdullah » Tue Aug 05, 2014 9:23 am

My board SKU number is A101020.

I use SanDisk Ultra microSDHC 8GB as SD card. System boot log is attached below.
Attachments
parallella_boot_log.txt
(11.77 KiB) Downloaded 258 times
Last edited by yildizabdullah on Tue Aug 05, 2014 4:12 pm, edited 1 time in total.
yildizabdullah
 
Posts: 15
Joined: Thu Jul 31, 2014 10:51 am
Location: Istanbul

Re: Cannot boot from SD-Card with headless configuration

Postby yildizabdullah » Tue Aug 05, 2014 10:48 am

Actually, I've found that a similar problem and its solution had been discussed before at

http://forums.parallella.org/viewtopic.php?f=48&t=1353.

You can find ajtravis's solution at http://forums.parallella.org/viewtopic.php?f=48&t=1353&hilit=plymouth&start=30#p9591.
yildizabdullah
 
Posts: 15
Joined: Thu Jul 31, 2014 10:51 am
Location: Istanbul

Re: Cannot boot from SD-Card with headless configuration

Postby yildizabdullah » Tue Aug 05, 2014 12:34 pm

I've only changed the property bootargs as

Code: Select all
- bootargs = "console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4 rootwait devtmpfs.mount=0";

+ bootargs = "console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlyprintk rootfstype=ext4 rootwait";


What is the point of removing devtmpfs.mount=0 to log in?
yildizabdullah
 
Posts: 15
Joined: Thu Jul 31, 2014 10:51 am
Location: Istanbul


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 1 guest