Problem on signup-Parallela University Program

Forum for anything not suitable for the other forums.

Problem on signup-Parallela University Program

Postby rovirob » Fri Jun 20, 2014 1:23 pm

Good day Adapteva community !
I am representing a University . We have been running a laboratory in which we do algorithmics and robotics research.
We have been trying to sign up for your university program but for some reason our emails are being rejected.
Could you provide us with a contact email that works ?
rovirob
 
Posts: 3
Joined: Fri Jun 20, 2014 1:10 pm

Re: Problem on signup-Parallela University Program

Postby gceline » Fri Jun 20, 2014 1:38 pm

I see one email from you in the University program email inbox - sorry, we are a bit backed up.
If emails bounce - try support@parallella.com
Graham
Adapteva
gceline
 
Posts: 119
Joined: Wed Jul 31, 2013 12:06 pm
Location: Lexington, MA

Re: Problem on signup-Parallela University Program

Postby rovirob » Fri Jun 20, 2014 3:19 pm

Thank you very much ! I just send the same email with the attached documents to the address you mentioned , but the response i received looks like this :

The original message was received at Fri, 20 Jun 2014 18:17:13 +0300
from localhost [127.0.0.1]

----- The following addresses had permanent fatal errors -----
<support@parallella.com>
(reason: 550 No Such User Here)

----- Transcript of session follows -----
... while talking to mail.parallella.com.:
>>> RCPT To:<support@parallella.com>
<<< 550 No Such User Here
550 5.1.1 <support@parallella.com>... User unknown
>>> DATA
<<< 503-All RCPT commands were rejected with this error:
<<< 503-No Such User Here
<<< 503 valid RCPT command must precede DATA
rovirob
 
Posts: 3
Joined: Fri Jun 20, 2014 1:10 pm

Re: Problem on signup-Parallela University Program

Postby gceline » Fri Jun 20, 2014 5:27 pm

my bad - support@parallella.org
.com is not correct
Graham
Adapteva
gceline
 
Posts: 119
Joined: Wed Jul 31, 2013 12:06 pm
Location: Lexington, MA

Re: Problem on signup-Parallela University Program

Postby rovirob » Fri Jun 20, 2014 8:14 pm

Thank you very much ! That worked very well !
rovirob
 
Posts: 3
Joined: Fri Jun 20, 2014 1:10 pm


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 32 guests